Quatech Serial Device Server Manual do Utilizador descarregar pdf (Página 84)

Configuring the SDS using a Web interface Quatech SDS User’s Manual

Upgrading firmware

Step Procedure Description

 Preliminary

Step

Click on Admin in the selection bar and

then select Upgrade Firmware from the

left panel.

The Upgrade Firmware screen

displays.

Figure 67 - Firmware Upgrade screen

Note: Only SDS devices with a

firmware revision level of 5.0

and above can support SNMP.

Determine the revision level of

an SDS (check the bottom of

the Home page in the Web-based

interface) before upgrading the

firmware.

Step Procedure Description

 Step 1 Browse to the location with the revised

firmware file.

Most of Quatech’s device drivers are

available from our Web site.

 Step 2 Press Send File. The Remote Reset screen displays.

Figure 68 - Remote Reset

Step Procedure Description

 Step 3 Press Reset to reset your SDS. The SDS must be reset to implement the

new firmware.

Page 78 940-0183-153 July 2005

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 97 98

Sem comentários

Quatech Serial Device Server Manual do Utilizador Página 84