Quatech SSP-100 Manual do Utilizador descarregar pdf (Página 32)

Figure 10. Windows 2000 Resource Allocation

5. Several predefined Basic Configurations have been included for the SSP-100

. The SSP-100 can either be forced to use a “standard” base address for

COM1 - COM4, or it may be configured to allow Windows to assign the base

address. Standard base I/O addresses are defined only for the first four logic

COM ports: 3F8 (COM1), 2F8 (COM2), 3E8 (COM3), 2E8 (COM4). Some

older applications are limited to using COM1 - COM4 , in which case forcing

the SSP-100 to use a “standard” base address may be necessary. When

Windows is allowed to select the base I/O address, a “standard” COM1 -

COM4 base address is usually selected if one is available. Otherwise, a

non-standard base address is used. Windows enumerates any COM port at a

non-standard address starting with COM5.

SSP-100

User’s Manual

3-9

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 50 51

Sem comentários

Quatech SSP-100 Manual do Utilizador Página 32