Quatech WLNG-ET-DP500 Series Manual do Utilizador descarregar pdf (Página 49)

Quatech, Inc. Company Confidential

100-8081-100 Airborne CLI Reference Manual 49

13.0 Power Save

Control of the operating and standby power of the module can be critical in many

applications; the Airborne Enterprise Device Server family offers various levels of control

through the CLI interface, the following power save options are currently supported.

Table 16 – Power-Save Modes

Command

Description

radio-on

Enables power to the 802.11b/g radio. The radio will utilize the power profile

defined by pm-mode.

After this command is issued the radio will initiate and attempt to locate a

valid wireless network to associate with. If one is found it will attempt to

associate/authenticate.

radio-off

Disables power to the 802.11b/g radio.

After the command is issued the device server will close all TCP/IP and UDP

connections and power down the radio. When in this state the device server

will no longer be associated with a wireless network and any network based

communication will not be possible.

pm-mode

Set’s the device server power management mode. Currently supports the

modes described in Table 17.

Table 17 - pm-mode Parameters

Mode

CPU

OSC/PLL

Radio

Wakeup

active

None.

doze

STOP

PSPoll

UART/Serial Traffic or directed/broadcast radio

packet.

Radio wakes on DTIM Period.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 119 120

Sem comentários

Quatech WLNG-ET-DP500 Series Manual do Utilizador Página 49